Synthesis of novel stimuli-responsive hydrogels based on polyurethane.

This article describes the study of a thermo-responsive hybrid systems based on polyurethane (PU) modified with sensitive acrylamide derivates. The hybrid systems were synthesized using PU and two acrylamide derivatives (N-isopropylacrylamide (NIPA) and N-isopropylmethacrylamide (NIPMA)) in different proportions. The systems were characterized using infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and dynamic light scattering (DLS). Water-uptake capacity and sedimentation rate were also determined. The results showed that the hybrids with 30% acrylamide derivate (AD) showed a T50 of approximately 360 °C indicating that thermal degradation decreased with the addition of NIPA and NIPMA. Additionally, the incorporation of AD increases the glass transition temperature from −34 to −22 °C when 30% AD was used. The hybrids with 30% AD showed a variation in the diameters (above 60%) when the temperature was decreased from 50 to 22 °C. These changes were attributed to the hydrophilic → hydrophobic transition that occurs when measuring below and above the low critical solution temperature (LCST) of the polymer. Furthermore, the extra methyl group in the structure of NIPMA makes the collapse less pronounced than in NIPA, decreasing the relative diameter change by 10%. Sedimentation tests showed that the addition of the hybrid hydrogels in the sand increased the time of decantation by 60%. So, the combination of two thermo-responsive polymers to alter the hydrophilic/hydrophobic balance allows these polymers to modify their conformation at a specific temperature and could be potentially useful as self-suspending support agents or drug delivery systems. [ABSTRACT FROM AUTHOR]