Experimental study on the effect of temperature on HDPE geomembrane/geotextile interface shear characteristics.

Geomembranes (GMBs) and geotextiles (GTXs) are the most widely used geosynthetics in landfills and other barrier systems. While various temperature environments may be encountered in practice, the interface shear characteristics of geosynthetics under different temperatures are still not clear. Shear tests of the interface between a high-density polyethylene GMB and nonwoven GTX are performed using a temperature-controlled submerged direct shear apparatus. The testing temperatures range from 10 °C to 70 °C, which covers most of the situations commonly encountered in engineering. The shear behaviors of the textured GMB/GTX interface and smooth GMB/GTX interface are presented, and the mechanism of the temperature influence is analyzed according to the test results and phenomena. Temperature has a significant impact on the GMB/GTX interface peak strength and post-peak strength, and maximum interface shear strength could be obtained when the temperature is approximately 30–40 °C. The influencing mechanisms of temperature on the GMB/GTX interface shear strength are thoroughly discussed. The shear characteristics of the GMB/GTX interface under different temperatures are critical to the stability analysis of geosynthetic slopes in special condition, and this study can also provide a reference for the effect of temperature on the shear behavior of other geosynthetics. • Submerged shear tests of the GMB/GTX interface are conducted at wide temperature ranges covering most of the situations. • Significant weakening of the GMB/GTX interface shear strength has been confirmed to exist at high temperatures. • The influencing mechanism of temperature on interface friction is different from that on asperity interlocking. [ABSTRACT FROM AUTHOR]