High-efficiency green machining of single crystal 4H–SiC based on tribo-oxidation.

High efficiency, high quality and green machining of single crystal silicon carbide (SiC) is an important issue in the third-generation semiconductor industry. In this paper, a novel machining method for single crystal SiC based on tribo-oxidation is proposed. The formula and preparation process of polysaccharide bonded soft abrasive tool were designed. Dry machining of C-face of 4H–SiC substrate was carried out with the prepared environmentally friendly abrasive tool sample. The material removal mechanism of the proposed machining method was preliminarily analyzed, and the material removal rate, surface roughness and subsurface residual stress were studied. The experimental results show that the maximum material removal rate of 4H–SiC can reach 1.03 μm/min with a corresponding average surface roughness of S a 0.816 nm. The machined surface has no brittle flaw, and subsurface residual compressive stress exists with a maximum value of 58.9 MPa. The material removal mainly attributed to the active oxidation of SiC surface induced by the friction between alumina abrasives and SiC substrate. The proposed machining method has potential application value in thinning of SiC wafers. [ABSTRACT FROM AUTHOR]