Failure investigation of steel and brick aggregate concrete composite construction with angle and channel shear connectors.

This investigation focuses mainly on the failure behaviour and performance of angle and channel shear connectors in composite structures made with steel and brick aggregate concrete. It was observed that both angle and channel shear connectors did not fail themselves. However, in some specimens, localised connector yielding was observed in channel shear connectors. In both cases, concrete strata failed as either concrete crushing and shearing, combined splitting and bending, or complete splitting mode of failure. Crushing and shearing failure was noticed in specimens having smaller web and flange and were brittle in nature as compared to the failure of specimens with larger web and flange. Other parameters, such as shear resistance, energy absorption, and load-slip behaviour, were also investigated. Web height and flange width of both connectors significantly affected the ultimate shear capacity and slip of the brick aggregate concrete specimen. Channel connectors were found more flexible and carried more shear than angle connectors. Channel connectors had an average of 32.41% and 116.17% more ultimate load and slip capacity than the angle connectors in brick aggregate concrete, respectively. The load-carrying capacity, slip, and failure behaviour of the brick aggregate concrete were found similar to those of stone aggregate concrete. [ABSTRACT FROM AUTHOR]