Construction of high performance fuel electrode in solid oxide electrolysis cells by tuning the surface oxygen defect to promote electrochemical reduction of CO2.

B-site Co–Fe-based perovskite materials have shown potential as ceramic cathodes in solid oxide electrolysis cells (SOECs) for direct CO 2 electrolysis. Nevertheless, their operational utilization is constrained by insufficient catalytic activity and durability in pure CO 2. In this work, F− doping and A-site deficiency strategies are proposed and La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 (LSCF), F-doped La 0.6 Sr 0.4 Co 0.2 Fe 0.8 F 0.1 O 2.9 (LSCFF) and A-site deficiency combined with F-doped (La 0.6 Sr 0.4) 0.95 Co 0.2 Fe 0.8 F 0.1 O 2.9 (LSCFF95) are prepared as cathode materials for CO 2 electrolysis. After doping with F−, the valence states of both Co and Fe elements decrease, while generating more oxygen vacancies. With the further introduction of A-site deficiency, the valence states further decrease, resulting in more oxygen vacancies. The enhancement of oxygen vacancies leads to an improvement in the oxygen surface exchange coefficient (k chem) and the bulk diffusion coefficient (D chem) of LSCFF and LSCFF95 materials. At 800 °C, k chem of LSCFF and LSCFF95 reach 24.21 × 10−4 and 33.54 × 10−4 cm s−1, respectively, which are 51% and 110% higher than the value of 16.03 × 10−4 cm s−1 for LSCF. Meanwhile, the D chem values of LSCFF and LSCFF95 are measured to be 37.52 × 10−5 and 47.81 × 10−5 cm2 s−1, respectively. These values are 49% and 90% higher than the value of 25.22 × 10−5 cm2 s−1 for LSCF. Consequently, F− doping and A-site deficiency significantly increase the electrochemical performance. For example, F− doping decreases the polarization resistance (R p) value of the SOEC with LSCF cathode from 0.19 Ω cm2 to 0.13 Ω cm2 at 800 °C. Furthermore, when the A-site deficiency is introduced, the R p value is further reduced to 0.11 Ω cm2. Therefore, the SOEC with the LSCFF95 cathode exhibits excellent performance. Specifically, it has demonstrated an impressively high current density of 2.85 A cm−2 at 800 °C and 1.5 V, and has exhibited exceptional durability over prolonged operation. [ABSTRACT FROM AUTHOR]