Limits on Ti Element Transfer in Submerged Arc Welding: Thermochemical Analysis.

TiO2 inclusion formation in the weld pool is required to produce potent nucleation sites for acicular ferrite microstructure formation. Weld metal oxygen content must be limited to ensure acceptable materials properties, although sufficient oxygen is required for inclusion formation. Weld pool oxygen is sourced from the decomposition of flux oxides. Weld metal oxygen is controlled with flux chemistry formulation by CaF2 dilution of oxides. In conventional submerged arc welding (SAW), the flux is the source of weld metal Ti. Transfer of Ti from the slag appears to be limited to 400 parts per million (ppm). SAW modification by metal powder additions changes the element transfer reactions. Thermochemical analysis is applied to explain the limitations in Ti transfer from the slag, compared to improved reaction conditions for Ti element transfer in the aluminum‐assisted Ti alloying of weld metal. Low TiO2 activity due to low flux TiO2 content from CaF2 dilution and Ti loss from Ti‐fluoride gas formation limits Ti transfer from slag. Aluminum‐assisted alloying of the weld metal shifts the gas composition from Ti‐fluoride formation to Al‐fluoride formation and lowers the system partial oxygen pressure to increase the weld metal Ti content, with acceptable ppm O remaining in the weld metal. [ABSTRACT FROM AUTHOR]