The Far-INfrarEd Spectrometer for Surface Emissivity (FINESSE) Part II: First measurements of the emissivity of water in the far-infrared.

In this paper we describe a method for retrieving surface emissivity across the wavenumber range 400–1600 cm-1 using novel radiance measurements from the Far INfrarEd Spectrometer for Surface Emissivity (FINESSE) instrument. FINESSE is described in detail in part I of this paper. We apply the method to two sets of measurements of distilled water. The first set of emissivity retrievals is of distilled water heated above ambient temperature to enhance the signal to noise ratio. The second set of emissivity retrievals is of ambient temperate water at a range of viewing angles. In both cases the observations agree well with calculations based on compiled refractive indices across the mid and far-infrared. It is found that the reduced contrast between the up and downwelling radiation in the ambient temperature case degrades the performance of the retrieval. Therefore a filter is developed to target regions of high contrast which improves the agreement between the ambient temperature emissivity retrieval and the predicted emissivity. These retrievals are, to the best of our knowledge, the first published 10 retrievals of the emissivity of water that extend into the far-infrared and demonstrate a method that can be used for the in-situ retrieval of the emissivity of other surfaces in the field. [ABSTRACT FROM AUTHOR]