Ethylene trimerization using half‐sandwich titanium‐based catalysts supported on mesoporous silica modified with ionic liquids.

Linear alpha olefins (LAOs) are produced industrially via ethylene oligomerization using catalytic methods. The cost‐effective separation process has sparked significant interest in the selective oligomerization of ethylene to produce alpha‐olefins, including 1‐hexene (1‐C6), in multi‐product commercial processes. In addition, the utilization of immobilized catalysts is crucial because of their reduced environmental impact, ease of catalyst separation, recyclability, and transportability. Furthermore, the use of immobilized catalysts simplifies the purification process, making it easier to isolate pure products. In the present study, mesoporous silica (MS) was first modified with ionic liquids (ILs) consisting BF4− and Br− counter‐anions to prepare IL‐BF4@MS and IL‐Br@MS, respectively. Then 12 catalysts were synthesized through immobilization of the half‐sandwich catalysts with different bridges on the surface of MS, IL‐Br@MS, and IL‐BF4@MS and characterized by BET, TGA, and SEM–EDX‐Mapping analyses. UV–Visible spectroscopy showed a tetrahedral structure for the synthesized complexes. The activity and selectivity of the catalysts for the production of 1‐hexene were studied under specific conditions, including an ethylene pressure of 8 bar, a temperature of 40 °C, and an Al/Ti ratio of 1:2000. The C1‐IL‐BF4@MS immobilized catalyst with cyclohexane middle bridge immobilized on MS modified with IL‐BF4 revealed the highest activity (1199 kg 1‐C6 molTi−1·h−1) at a catalyst concentration of 1.5 μmol. The lowest activity (138 kg 1‐C molTi−1·h−1) was obtained for both C3@MS and C4@MS catalysts. [ABSTRACT FROM AUTHOR]