Constitutive Model and Mechanical Properties of Grade 8.8 and 10.9 High-Strength Bolts at Elevated Temperatures.

This paper presents an experimental study on the determination of the mechanical behaviors of Grade 8.8 and 10.9 high-strength bolts at elevated temperatures. Strength reduction coefficients are obtained based on test results at temperatures ranging from 20°C to 900°C, for both yield and ultimate stresses. Simplified expressions are presented to identify the strength reduction factors at considered temperatures. At 400°C, the yield and ultimate strengths of bolts decrease by 30%–35% for both grades compared to those in ambient temperature. Yield strengths are 30% and 20% of yield strengths of Grade 8.8 and 10.9 bolts at ambient temperature, respectively, when the temperature exceeds 500°C. The ultimate strength decreases slightly slower than the yield strength at high temperatures. Although the decrease in ultimate strength follows the decrease in yield strength at elevated temperatures, it is slightly slower. About 3%–6% of yield and ultimate strengths at ambient temperature remain for both grades at 700°C. Moreover, a series of expressions are provided to obtain the full range stress–strain curve of high-strength bolts at elevated temperatures. Comprehensive literature studies are taken into consideration to propose a more generalized description of the stress–strain curves. The proposed model can be fully drawn by only using elastic modulus, yield, and ultimate stresses at ambient temperature. It is shown that the proposed model has enough efficiency to describe the general material behavior at elevated temperatures. [ABSTRACT FROM AUTHOR]