Two-buoy and single-buoy floating wave energy converters: A numerical comparison.

A numerical model of two-buoy and single-buoy floating wave energy converters (WECs) is developed based on a modified nonlinear version of WEC-Sim. The model is validated against experimental data from a 1:5 geometric scale model of a two-buoy floating WEC. Nonlinear behavior is primarily attributed to viscous damping and mechanical friction effects. It is found that a modified version of WEC-Sim obtained by correcting the phase of the wave excitation force in the source code provides an accurate representation of a two-buoy WEC operating in either linear or nonlinear mode. An equivalent single-buoy WEC is modeled by locking the two-buoys together. The two-buoy WEC exhibits more than double the predicted maximum energy capture efficiency than its single-buoy counterpart within the range of numerical tests considered. Simulations of idealized floating WECs in conditions representative of Zhaitang Island, China indicate that the maximum energy capture efficiency may be enhanced by 13 % when using a two-buoy system instead of a single-buoy WEC. The findings should be useful to practitioners involved in the design of floating wave energy converters. • Nonlinear dynamic numerical modeling method is proposed. • Correction to phase of wave excitation force implemented in WEC-Sim model. • Parameter study compares CWRs of corresponding two-buoy and single-buoy systems. • Useful data for the design and development of prototype two-buoy devices. [ABSTRACT FROM AUTHOR]