Willow, Poplar, and Black Locust Debarked Wood as Feedstock for Energy and Other Purposes.

Solid biomass can be used for energy generation and the production of various renewable bioproducts. The aim of this study was to determine the yield and characteristics of wood obtained as debarking residue from 14 genotypes of short-rotation woody crops (SRWCs). These included five Populus genotypes, one Robinia genotype, and eight Salix genotypes, harvested in both annual and quadrennial cycles. The results showed that the highest dry wood yield (12.42 Mg ha−1 y−1 DM) and yield energy value (244.34 GJ ha−1 y−1) were obtained from willow (cultivar Żubr) harvested in a quadrennial cycle. The best effect among the poplar genotypes was achieved for the Hybryda275, and it was particularly marked in the quadrennial harvest cycle. The poorest results were determined for black locust. The Robinia characteristics included the significantly lowest moisture content (31.6%), which was a positive attribute from the energy point of view, but, on the other hand, it had some adverse characteristics—the highest levels of sulfur (0.033% DM), nitrogen (0.38% DM), and ash (0.69% DM). More beneficial properties in this respect were determined for willow and poplar wood. Moreover, willow and poplar wood contained more cellulose—51.8 and 50.0% DM, respectively—compared with black locust. Extending the SRWC shoot harvest cycle from annual to quadrennial resulted in an increase in cellulose, lignin, and carbon, higher heating value, and a decrease in nitrogen, sulfur, ash, and moisture content. Therefore, extending the harvest cycle improved the parameters of SRWC wood as an energy feedstock. [ABSTRACT FROM AUTHOR]