The synthesis and research of a novel organosilicon-modified waterborne blocked polyisocyanate crosslinker with a semi-interpenetrating network structure.

The organosilicon intermediate containing hydrophilic tertiary amines was synthesized from N-Methylmonoethanolamine (MEA) and (3-glycidyloxypropyl) trimethoxy silane (GPTMS), followed by neutralization with acetic acid (Ac). Meanwhile, a polyurethane (PU) prepolymer was prepared by sequentially polymerizing hexamethylene diisocyanate trimer (HT-100) with polyethylene glycol (PEG-600) and methoxy polyethylene glycol (MPEG), and then chain extended by the intermediate. Ultimately, methyl ethyl ketone oxime (MEKO) was selected to block the remaining NCO group, forming a branched polyisocyanate crosslinker. Subsequently, a linear polyisocyanate crosslinker was prepared in the same system by polymerizing hexamethylene diisocyanate (HDI) with the intermediate. Consequently, an organosilicon-modified waterborne blocked polyisocyanate crosslinker with a semi-interpenetrating network structure was obtained and further processed through hydrolysis to obtain the corresponding crosslinker containing silanol groups. The structure and thermal properties of the crosslinkers were analyzed using 1H NMR, FT-IR, TG, and DTG. Furthermore, the comprehensive mechanical properties of the cured films were investigated. The results indicate that the crosslinker system containing silanol groups exhibits superior performance. When the films' maximum adhesion and the wiping resistance were optimized at 1.97 MPa and 72 times, respectively, the impact resistance still maintained above 85 cm. • The introduction of organosilicon into the polyisocyanate crosslinker structure can realize multiple crosslinking for resins • The crosslinker has a semi-interpenetrating network structure and exhibits excellent mechanical properties in applications • Organosilicon-modified waterborne blocked polyisocyanate might have good application prospects in waterborne coatings [ABSTRACT FROM AUTHOR]