Vortex synchronization-enabled heat-transfer enhancement in a channel with backward- and forward-facing steps.

A channel with one backward-facing step and one forward-facing step is a typical configuration in engineering applications. In the channel, good heat transfer performance is often required, and the enhancement is usually achieved by employing different passive control methods, such as modification of geometric configuration or application of nanofluid. However, the other control method, i.e., active flow control (AFC), which is likely more effective, has been rarely applied in such a scenario. This study aims to bridge this gap by exploring how a rigid plate affects the heat transfer of the channel. The plate either is stationary or actively rotates, corresponding to passive flow control or AFC. The influences of the horizontal position of the plate (S) and its orientation angle (θ) on the heat transfer performance are studied when the plate is stationary to provide a baseline. Compared to the baseline, the effects of S, θ, and the rotation frequency (fr) are revealed when the plate undergoes a sinusoidal rotation. Such a thermo-fluid dynamic problem is numerically simulated by the immersed-boundary lattice Boltzmann method. The results show that the plate can improve the heat transfer performance no matter whether it rotates or not, compared to the case without a plate. The rotating plate outperforms the stationary one when θ and fr are properly chosen at each S. Substantial improvement can be achieved when vortex synchronization or resonance occurs in the channel, i.e., when the natural vortex shedding frequency is close or equal to fr. [ABSTRACT FROM AUTHOR]