Realizing high mechanical and thermoelectric properties of N-type Bi2Te2.7Se0.3 ingots through powder sintering and carrier concentration regulation.

Bi 2 Te 3 -based crystal ingots produced by zone melting (ZM) are the most widely used materials to manufacture commercial thermoelectric (TE) devices. However, the poor mechanical properties of such crystalline materials limit the production of small-scale devices. While processability can be improved by powder metallurgy (PM), it also leads to the deterioration of the TE properties due to the donor-like effect of the introduced defects and grain boundaries. Thus, additional efforts towards re-optimizing doping are required. Here, we report a PM method to improve the mechanical properties of Bi 2 Te 3 -based TE materials through the crushing and hot pressing of Bi 2 Te 3 ingots obtained by ZM. Besides, we demonstrate the TE properties of n-type Bi 2 Te 2.7 Se 0.3 (BTS) to be remarkably improved by Cu doping, which enables optimization of the carrier concentration and enhances phonon scattering at heterointerphases thus increasing the Seebeck coefficient and reducing thermal conductivity. Overall, optimized materials reach dimensionless TE figures of merit (ZT) up to 1.16 at 408 K, i.e. 45% higher than that of state-of-the-art BTS, and an average ZT value of 1.08 in the temperature range of 300–473 K. [ABSTRACT FROM AUTHOR]