Rock mass permeability evolution during triaxial shearing based on three-dimensional distinct element model (3DEC) simulation.

[Display omitted] The evolution and change in jointed rock mass hydraulic conductivity (k rm ) during triaxial compression was investigated using the discrete element method code 3DEC bonded block model approach. The code's fluid flow logic was used to simulate flow tests at various stages, from the initial confined state through to the post-peak (i.e., failed) state. A target percent of joint contacts were randomly "broken" to produce different initial fracture intensities. The rock mass fluid flow behaviour was compared with laboratory flow tests of thermally brecciated granular marble. A new joint constitutive model was developed to account for nonlinear, hysteretic load–displacement behaviour to accurately reproduce changes in joint aperture due to complex inter-block stress changes. The simulations provided quantifiable measurements of k rm evolution with axial strain throughout the test for several rock mass quality conditions. The evolution of k rm with loading was found to be nonlinear, with significant increases associated with yielding-induced dilation, followed by relatively minor changes in the post-peak loading range. These trends are similar to the laboratory tests conducted on intact rock and on rock joints. The findings will be useful for improving groundwater flow models for stability assessment of rock slopes, particularly where significant shearing is expected. [ABSTRACT FROM AUTHOR]