Influence of sensor installation tilt angle on explosion shock wave pressure test.

The surface reflection pressure sensor installation flatness will directly lead to the change of the explosion shock wave pressure propagation and distribution law, affecting the test results accuracy, and the test data cannot accurately evaluate the ammunition explosion damage power. In this study, the numerical simulation model of the explosion shock wave pressure propagation and distribution law was established by using the explosive mechanics simulation software, and the pressure distribution law was studied when the sensors installation angles were 0°, 4°, 8°, 12°, −4°, −8°, and −12° respectively. Combined with analysis of the pressure peak value and the pressure evolution nephogram at different measuring points, it is clarified that the positive tilt angle of the sensor installation has an enhancing effect on the pressure peak, while the negative tilt angle has a attenuation effect on the pressure peak. Based on the calculation function formula of the surface reflected pressure peak value in the national defense engineering design code, the surface reflected pressure peak value correction function formula is established by introducing the sensor installation angle correction effect. This study results provide a theoretical basis for the design of ammunition explosion shock wave pressure engineering test scheme and the test data validity verification. [ABSTRACT FROM AUTHOR]