Molecular Dynamics Simulation Research on Fe Atom Precipitation Behaviour of Cu-Fe Alloys during the Rapid Solidification Processes.

To explore the crystalline arrangement of the alloy and the processes involving iron (Fe) precipitation, we employed molecular dynamics simulation with a cooling rate of 2 × 1010 for Cu100-XFeX (where X represents 1%, 3%, 5%, and 10%) alloy. The results reveal that when the Fe content was 1%, Fe atoms consistently remained uniformly distributed as the temperature of the alloy decreased. Further, there was no Fe atom aggregation phenomenon. The crystal structure was identified as an FCC-based Cu crystal, and Fe atoms existed in the matrix in solid solution form. When the Fe content was 3%, Fe atoms tended to aggregate with the decreasing temperature of the alloy. Moreover, the proportion of BCC crystal structure exhibited no obvious changes, and the crystal structure remained FCC-based Cu crystal. When the Fe content was between 5% and 10%, the Fe atoms exhibited obvious aggregation with the decreasing temperature of the alloy. At the same time, the aggregation phenomenon was found to be more significant with a higher Fe content. Fe atom precipitation behaviour can be delineated into three distinct stages. The initial stage involves the gradual accumulation of Fe clusters, characterised by a progressively stable cluster size. This phenomenon arises due to the interplay between atomic attraction and the thermal motion of Fe-Fe atoms. In the second stage, small Fe clusters undergo amalgamation and growth. This growth is facilitated by non-diffusive local structural rearrangements of atoms within the alloy. The third and final stage represents a phase of equilibrium where both the size and quantity of Fe clusters remain essentially constant following the crystallisation of the alloy. [ABSTRACT FROM AUTHOR]