Bioprint FirstAid: A handheld bioprinter for first aid utilization on space exploration missions.

Human exploratory missions to Moon or Mars are considered the next steps in human space exploration. Such activities result in the exposure of humans to the space environment for long time, especially under the constraints of orbital dynamics as with increasing distances from earth quick return possibilities are ruled out. Crews on these kinds of missions must be self-sustaining in medical treatments, as environmental conditions in space, such as the influence of altered gravity, radiation or isolation, raise health issues. Therefore, astronauts may use the here presented Handheld Bioprinter as part of the first-aid strategy for in situ wound treatment. The device consists of a handle capable of holding an exchangeable "Ink Printing Unit" containing two separate gel-like components (Bioink and Crosslinker), which are extruded during a printing process through a nozzle and form a skin-cell containing bioink band-aid. For ISS experiments cell simulants were used, as in-space experiments first demonstrated the general feasibility of handheld bioprinting under space conditions. On-ground human skin cells were mixed with the biogel, printed via the handheld bioprinter and cultivated, to demonstrate the overall feasibility of the "Bioprint FirstAid" technology. Concluding results were that a mobile, handheld tool like the bioprinter shows good applicability and offers a possibility of in situ wound treatment for in-space applications. The "Bioprint FirstAid" project was coordinated by the German Space Agency at the German Aerospace Center (DLR) in Bonn and funded by the Federal Ministry for Economic Affairs and Climate Action (BMWK). • Handheld Bioprinter offers possibility for in-situ wound treatment in future in-space applications • Human skin cells proliferate in biogels after printing with handheld bioprinter • The customizable Ink-printing unit and nozzle can be tailored to specific printing demands • Bioprinter device has low susceptibility to failure, has a robust design, no electronics, and maintenance-free mechanics • German Astronaut Matthias Maurer conducted the Bioprinting experiment successfully on board the ISS [ABSTRACT FROM AUTHOR]