The effect of ZnO and MnO2 as sintering aids in the preparation of potassium sodium niobate ceramics and electrical characterizations.

Potassium sodium niobate (KNN) is an environmentally compatible piezoelectric material for substituting harmful lead-based ceramics. KNN-based ceramics have excellent piezoelectric properties with high Curie temperature. But, KNN faces difficulties during the processing like volatilization of alkali elements, chemical inhomogeneity, low densification, etc. The objective of this research is to investigate the impact of certain metal oxides additions like ZnO and MnO2 as sintering aids to solve the problems of the preparation and hence study the structural and electric properties of K0.5N0.5NbO3 (KNN) ceramics. ZnO and MnO2 added potassium sodium niobate, K0.5N0.5NbO3 was prepared by using the ceramic method. The prepared samples were sintered at 1000 °C for 2h conventionally. The structural properties of the ceramics have been analyzed by using X-Ray Diffractometer. The study demonstrates the formation of the orthorhombic-symmetric perovskite phase in all the prepared samples. The microstructural behavior of the ceramics has been characterized by techniques such as scanning electron microscopy (SEM) and compositional properties were studied by energy dispersive x-ray (EDAX). The effects of metal oxide additions on the electronic properties such as dielectric constant, dielectric loss, impedance properties, Nyquist plot, etc., were studied. The results have been analyzed and discussed in the paper. [ABSTRACT FROM AUTHOR]