Microstructure effect on the machinability behavior of additive and conventionally manufactured Inconel 718 alloys.

The microstructural characteristics and mechanical properties of forged parts differ significantly from those of additively manufactured parts, which results in different machinability. In this paper, the microstructure effect on the machinability of Inconel 718 parts obtained by different manufacturing processes, laser directed energy deposition (LDED), laser powder bed fusion (LPBF) and forging, is evaluated and critically discussed in terms of milling forces, surface morphology, surface roughness, chip morphology and subsurface microstructure. The results show that due to having the smallest grain size, high dislocation density, and precipitation hardening provided by the reinforcing phases, the milling force is maximized when cutting LPBF Inconel 718 parts. In addition to grain size and dislocation density, the texture also has an effect on the plastic deformation of the subsurface after milling. Furthermore, LDED and forged Inconel 718 parts undergo a continuous dynamic recrystallization process characterized by sub-grain rotation transforming low angle grain boundaries into high angle grain boundaries during milling. This study provides some theoretical guidance for the integration of additive and subtractive processes in the machining of complex structural parts with Inconel 718 alloy. [ABSTRACT FROM AUTHOR]