Evaluation of isolation performance of, reticulated shell structures with curvature-consistent frictional pendulum isolation system through shaking table tests.

In this study, we investigated the isolation effect of a curvature-consistent frictional pendulum bearing isolation system (CC-FPB-IS) on a long-span spatial structure. Considering a typical spherical reticulated shell in a long-span spatial structure as the research object, we conducted shaking table tests on a scaled reticulated shell structure equipped with fixed hinge bearings and CC-FPBs. In addition, a refined finite element simulation method was established to analyze to the seismic impact on an actual reticulated shell structure with isolation layers under different isolation conditions. The variations in the isolation effect on the dynamic responses under horizontal unidirectional, vertical, and three-dimensional ground motions were compared. The results indicated that the isolation layer comprising the CC-FPB can notably reduce the horizontal dynamic response of a reticulated shell structure under horizontal seismic action while retaining its elastic state during rare earthquakes. With increasing loading amplitude, the isolation rate of the long-span spatial structure increased and gradually reached the optimal value. However, the proposed CC-FPB-IS did not effectively reduce the dynamic response of the vertical component, and the isolation rate was relatively small. When subjected to a three-dimensional earthquake, the structure exhibited an isolation effect because of the coupling of earthquake components in different directions. Thus, the CC-FPB-IS has notable effects on the dynamic response of the overall structure. • A type of curvature-consistent frictional pendulum bearing isolation system (CC-FPB-IS) was proposed. • A series of shaking table tests were conducted on reticulated shell structure equipped with fixed hinge bearings and CC-FPBs. • The isolation effect of the CC-FPB-IS on the reticulated shell structure was obtained. • A refined finite element simulation method was established to analyse structures and isolation layers. • The CC-FPB-IS was applied to the actual long span spatial structure to analyse the influence law of isolation. [ABSTRACT FROM AUTHOR]