Start Over

Noise reduction for high-lift devices on a swept wing model by droop nose.

Authors :: Chen, Guoyong
Chen, Binnian
Yang, Xiaoquan
Tang, Xiaolong
Ding, Jue
Weng, Peifen
Source :: Aerospace Science & Technology. Dec2023, Vol. 143, pN.PAG-N.PAG. 1p.
Publication Year :: 2023
Abstract: The noise of slat in the high-lift device of large aircraft is one of the main noise sources of large aircraft during take-off and landing. This paper investigates a noise reduction measure which consists in droop nose for high-lift device of three-dimensional sweep wing instead of leading-edge slat. The unsteady flow field and the far-field noise are predicted by a hybrid SA-IDDES method coupled with the integration of the Ffowcs Williams–Hawkings equation (FW-H). Based on the optimal droop nose configuration from 2D airfoil, the results of the 3D swept wing model with the droop nose on the leading edge of the inner wing are given. Numerical results show that the droop nose configuration can reduce the overall sound pressure level (OASPL) of the intermediate frequency noise, and the peak noise can be reduced by 15 dB, and the sound pressure level of the broadband noise at low and high frequencies is also partially suppressed. The maximum lift-to-drag ratio of the droop nose configuration increased by 2.7 %. In addition, the noise reduction mechanism of leading-edge droop is analyzed by combining the vortex sound theory and the generation and evolution process of the vortex structure. The leading-edge droop nose configuration fundamentally not only eliminates the vortex structure of the slat cove of the leading-edge slat configuration, but also avoids the interaction between the slat slot flow and the upper surface of the main wing. These directly lead to a thinner boundary layer vortex near the top of the main wing, and the wall pressure pulsation is smaller than that of the leading-edge slat high-lift device, thereby reducing noise. The reduction of the BEF distribution on the upper surface boundary shows again that the droop nose inhibits the vortex on the upper surface of the main wing. The change of the Lamb vector divergence reveals the noise reduction mechanism of the drooping leading edge configuration directly from the sound source. [ABSTRACT FROM AUTHOR]