I-section stainless steel portal frames: Loading tests and numerical modelling.

Austenitic stainless steel is an attractive structural material due to its high ductility, appropriate toughness, significant strain hardening and good fire resistance. Also the laser welding technology for fabrication of structural stainless steel profiles has recently become increasingly popular. However, there is still only a limited amount of experimental data on laser-welded stainless steel members. And loading tests of whole structures made of these sections have still not been published. Therefore, loading tests were performed on two austenitic stainless steel frames made of laser-welded I-sections. The frames had pinned columns and were loaded both vertically and horizontally. The objective of the loading tests was to capture the effects of material nonlinearity on the global sway behaviour of the stainless steel frames. In fact, material nonlinearity leads to a gradual loss of stiffness, which results in higher deformations and thus a higher second-order effect. The resulting load-displacement diagrams of the experiment are tabulated, allowing their further use. A numerical model of the studied frames was developed and validated on the basis of the performed experiments. Based on the elastic buckling load factor and the modified elastic buckling load factor, a large influence of material nonlinearity on second-order effect has been demonstrated. • Detailed arrangement of the frame loading tests with load introduction description. • Scheme of measuring devices and auxiliary elements for the loaded frames. • Tabulated load-displacement diagrams suitable for numerical model validation. • Validation of the numerical model based on experiments. • Influence of material nonlinearity on second-order effect. [ABSTRACT FROM AUTHOR]