Enhancing productivity and efficiency in conventional laser metal deposition process for Inconel 718 - part I: the effects of the process parameters.

The sustainable energy transition has spurred the development of technologies that minimize material and energy waste, such as additive manufacturing (AM). Laser metal deposition (LMD) is a promising AM technique, but its complexity and limited automation hinder its implementation in production chains. To enhance productivity, the high deposition rate LMD (HDR-LMD) technology has been developed, requiring advanced equipment and powerful laser sources. In contrast, the conventional LMD (C-LMD) process is simpler and less expensive to implement. This study aims to optimize the productivity and efficiency of C-LMD by adjusting laser power, scan speed, powder feed rate, and standoff distance on Inconel 718 single tracks. An innovative approach eliminates the need for cutting specimens to evaluate single tracks, allowing comprehensive geometric and performance characterization with limited operator involvement, making the analysis quicker and more robust. An extensive experimental campaign was conducted to examine the influence of process parameters on track geometry, productivity, and efficiency. A multi-objective optimization procedure identified parameter combinations maximizing productivity while maintaining high efficiency and desirable clad shape. The study attained deposition rates ranging from 700 to 800 g/h, with powder catchment efficiency ranging between 75 and 90%. These results were achieved using parameters including 1775 W of laser power, scan speeds ranging from 960 to 1140 mm/min, powder feed rates between 810 and 1080 g/h, and standoff distance of 9 mm. The study also clearly indicated that further potential for improving C-LMD process performance may be possible. The findings gathered in this paper are the base for the further optimization presented in the second part of the work, which is focused on multi-pass multi-layer and reaches deposition rates of 1500 g/h, promoting the implementation of C-LMD process at industrial level. [ABSTRACT FROM AUTHOR]