Deformation Monitoring and Analysis of Reservoir Dams Based on SBAS-InSAR Technology—Banqiao Reservoir.

Most dams in China have been operating for a long time and are products of the economic and technical limitations at the time of construction. Due to decades of aging engineering and ancillary problems, these reservoirs pose great threats to the safety of local people and the development of the surrounding economy. In this study, the surface deformation information for the Banqiao Reservoir is monitored with the small baseline subset–synthetic aperture radar interferometry (SBAS-InSAR) method using 80 Sentinel-1A images acquired from 3 January 2020 to 20 August 2022. Additionally, ground measurements from the BeiDou ground-based deformation monitoring stations were collected to validate the InSAR results. Based on the InSAR results, the spatiotemporal deformation features of the dam were analyzed in detail. The results show that the deformation in most areas, including the dam in the study area, is relatively stable, and the regional deformation velocity of the Banqiao Reservoir dam and other hydraulic engineering facilities varies between −1 mm/y and −4 mm/y. The Ru River area has a relatively obvious subsidence trend, and the maximum subsidence velocity reaches 30 mm/y. The InSAR monitoring results are consistent with the change trend in the BeiDou ground-based deformation measurement results. The monitoring results for the reservoir dam area provide a reference for local sustainable development and geological disaster prevention. [ABSTRACT FROM AUTHOR]