Rice husk biochar - A novel engineered bio-based material for transforming groundwater-mediated fluoride cycling in natural environments.

Biochar, a promising carbon-rich and carbon-negative material, can control water pollution, harness the synergy of sustainable development goals, and achieve circular economy. This study examined the performance feasibility of treating fluoride-contaminated surface and groundwater using raw and modified biochar synthesized from agricultural waste rice husk as problem-fixing renewable carbon-neutral material. Physicochemical characterizations of raw/modified biochars were investigated using FESEM-EDAX, FTIR, XRD, BET, CHSN, VSM, pH pzc , Zeta potential, and particle size analysis were analyzed to identify the surface morphology, functional groups, structural, and electrokinetic behavior. In fluoride (Fˉ) cycling, performance feasibility was tested at various governing factors, contact time (0–120 min), initial Fˉ levels (10–50 mg L−1), biochar dose (0.1–0.5 g L−1), pH (2–9), salt strengths (0–50 mM), temperatures (301–328 K), and various co-occurring ions. Results revealed that activated magnetic biochar (AMB) possessed higher adsorption capacity than raw biochar (RB) and activated biochar (AB) at pH 7. The results indicated that maximum Fˉ removal (98.13%) was achieved using AMB at pH 7 for 10 mg L−1. Electrostatic attraction, ion exchange, pore fillings, and surface complexation govern Fˉ removal mechanisms. Pseudo-second-order and Freundlich were the best fit kinetic and isotherm for Fˉ sorption, respectively. Increased biochar dose drives an increase in active sites due to Fˉ level gradient and mass transfer between biochar-fluoride interactions, which reported maximum mass transfer for AMB than RB and AB. Fluoride adsorption using AMB could be described through chemisorption processes at room temperature (301 K), though endothermic sorption follows the physisorption process. Fluoride removal efficiency reduced, from 67.70% to 53.23%, with increased salt concentrations from 0 to 50 mM NaCl solutions, respectively, due to increased hydrodynamic diameter. Biochar was used to treat natural fluoride-contaminated surface and groundwater in real-world problem-solving measures, showed removal efficiency of 91.20% and 95.61%, respectively, for 10 mg L−1 Fˉ contamination, and has been performed multiple times after systematic adsorption-desorption experiments. Lastly, techno-economic analysis was analyzed for biochar synthesis and Fˉ treatment performance costs. Overall, our results revealed worth output and concluded with recommendations for future research on Fˉ adsorption using biochar. • Activated magnetic biochar (AMB) significantly reduces 10 mg L−1 fluoride at pH 7. • Mass transfer rates were analyzed for fluoride-biochar interactions. • Salt strength reduces adsorption due to electrostatic attraction and agglomeration. • Total interaction energies due to biochar-biochar interaction were investigated. • AMB synthesis and treatment costs were 0.01 $ g−1 and 5.96 $ mol−1, respectively. [ABSTRACT FROM AUTHOR]