The "Effect of Marangoni Convection on Heat Transfer in Phase Change Materials" experiment.

Present as well as future challenges of space exploration point to the need for improved thermal control systems. The "Effect of Marangoni Convection on Heat Transfer in Phase Change Materials" experiment, which is approved by ESA for execution on board the International Space Station, aims to contribute directly to current knowledge and basic understanding of heat and mass transport in phase change materials (PCMs) that incorporate a free surface in reduced gravity. The experiment will apply fixed temperatures to opposite ends of PCM samples held in cuboidal and cylindrical containers in order to drive controlled melting and solidification cycles that will be observed by means of optical cameras. The recorded images will be complemented by thermal measurements at key positions along the samples, which will allow different thermocapillary flow regimes to be distinguished according to their temporal dynamics. It is anticipated that thermal Marangoni (thermocapillary) convection will increase the heat transfer rate in these PCM devices by a significant factor (on the order of two or more) compared to melting governed by thermal diffusion (conduction). If the PCM designs prove robust, the experiment results can be expected to lead to substantial improvements in future designs for passive PCM applications in space missions. • MarPCM aims to analyze heat and mass transport in PCMs. • PCM samples are subjected to controlled temperatures. • Cuboidal and cylindrical PCM geometries are studied. • Marangoni flows will increase the melting rate wrt. conduction. • MarPCM is approved by ESA for execution on board the ISS. [ABSTRACT FROM AUTHOR]