Preparation and properties of visible light-cured strippable film for radioactive decontamination.

In this research, solutions of styrene-butadiene-styrene block copolymer (SBS) in 2-ethoxyethyl methacrylate (EOEMA) were used to prepare strippable films via rapid visible-light curing, where the mixture of camphorquinone (CQ), diphenylsilane (DPS) and diphenyliodonium hexafluorophosphate (Iod) was employed as the photoinitiating system, LED@405 nm, sunlight or household LED panel light as the light source and no any solvent was involved. The double bond conversion for pure EOEMA under LED@405 nm was firstly monitored by real-time FTIR and it reached 72% within 300 s. The rapid-curing of SBS/EOEMA solutions were systematically investigated and it was found that the solution with 16 wt% SBS became completely dried at the presence of 2.16 mol% crosslinker and 3.6 wt% photoinitiating system after 240 s irradiation under LED@405 nm. The tensile strength, elongation at break and glass transition temperature of the resultant strippable film were determined to be about 4.4 ± 0.5 MPa, 130 ± 11.2% and 6.9 °C, respectively, by mechanical properties testing and DSC measurements. Also, the decontamination efficiencies (DE) of household LED panel light/sunlight cured-strippable film for uranium nitrate on stainless steel, glass, and ceramic surface were evaluated to be higher than 90%. These results indicate that this rapid-curing strippable films would be a good candidate material for large-scale radioactive decontamination. [ABSTRACT FROM AUTHOR]