Evaluating gas breakthrough pressure and gas permeability in a landfill cover layer for mitigation of hazardous gas emissions.

The construction of an engineered cover layer over landfills is a common method applied to reduce the emission of hazardous gases into the atmosphere. Landfill gas pressures can reach 50 kPa or even higher in some cases, thus posing a serious threat to nearby properties and human safety. As such, the evaluation of gas breakthrough pressure and gas permeability in a landfill cover layer is of great necessity. In this study, the loess soil that is often applied as a cover layer in landfills in northwestern China was used to conduct gas breakthrough, gas permeability, and mercury intrusion porosimetry (MIP) tests. Resultantly, the smaller the capillary tube diameter, the higher the capillary force, and the more significant the capillary effect. Gas breakthrough could be attained with no difficulty, provided that the capillary effect was minimal or approached zero. A good fit between the experimental gas breakthrough pressure–intrinsic permeability relationship and a logarithmic equation was found. The mechanical effect blew up the gas flow channel. In the worst-case scenario, the mechanical effect could lead to the overall failure of a loess cover layer in a landfill. A new gas flow channel was formed between the rubber membrane and the loess specimen as a result of the interfacial effect. Although both the mechanical and interfacial effects can elevate the gas emission rate, the latter did not play a role in the improvement of the gas permeability; therefore, misleading interference took place in the evaluation of the gas permeability, and an overall failure of the loess cover layer. To tackle this problem, the point at which the large- and small-effective stress asymptotes cross on the volumetric deformation– P eff diagram may be applied to give early warning signals of the potential overall failure of the loess cover layer in landfills in northwestern China. • The capillary effect is a crucial factor affecting the gas breakthrough pressure. • Both the mechanical and interfacial effects gear up the gas emission rate. • The interfacial effect can mislead the assessment of the failure of a cover layer. • The volumetric deformation goes up with decrease in P eff in an exponential manner. • Such exponential relationship gives early warning of the failure of a cover layer. [ABSTRACT FROM AUTHOR]