Very High Resolution Automotive SAR Imaging from Burst Data.

This paper proposes a method for efficient and accurate removal of grating lobes in automotive Synthetic Aperture Radar (SAR) images. Grating lobes can indeed be mistaken as real targets, inducing in this way false alarms in the target detection procedure. Grating lobes are present whenever SAR focusing is performed using data acquired on a non-continuous basis. This kind of acquisition is typical in the automotive scenario, where regulations do not allow for a continuous operation of the radar. Radar pulses are thus transmitted and received in bursts, leading to a spectrum of the signal containing gaps. We start by deriving a suitable reference frame in which SAR images are focused. It will be shown that working in this coordinate system is particularly convenient since it allows for a signal spectrum that is space-invariant and with spectral gaps described by a simple one-dimensional function. After an inter-burst calibration step, we exploit these spectral characteristics of the signal by implementing a compressive sensing algorithm aimed at removing grating lobes. The proposed approach is validated using real data acquired by an eight-channel automotive radar operating in burst mode at 77 GHz. Results demonstrate the practical possibility to process a synthetic aperture length as long as up to 2 m reaching in this way extremely fine angular resolutions. [ABSTRACT FROM AUTHOR]