Exploiting phase inversion for penta-amine impregnation of ultrafiltration support matrix for rapid fabrication of a hyper-cross-linked polyamide membrane for organic solvent nanofiltration.

For the sake of recovery of precious organic solvents from industrial organic solvent waste stream or alternatively for recovery of active principle ingredient (API) synthesized in pharmaceutical companies, organic solvent nanofiltration (OSN) membranes have recently been emerged. A thin film composite (TFC) membrane was fabricated by using rapid membrane fabrication technique. The PA(TEPA-TCL)@PSU/PETP membrane was fabricated by penta-amine (TEPA) impregnation of polysulfone (PSU) matrix during phase inversion which in turn was reacted with terephthaloyl chloride (TCL) through interfacial polymerization (IP). The PA(TEPA-TCL)@PSU/PETP membrane was characterized by scanning electron microscopy (SEM), water contact angle (WCA), energy dispersive X-ray (EDX) analysis, ATR-FTIR and elemental mapping. The PA(TEPA-TCL)@PSU/PETP membrane was applied for OSN by using water, methanol, ethanol and isopropanol as solvents. When methanol was used as feed, it showed a permeate flux of 28 L m−2 h−1 (LMH) at 20 bar. An inverse relationship was found between viscosity and flux of the solvents. A feed composed of methanol and dyes (dyes were used as model pollutants) was used to evaluate the OSN performance of the membrane. Apparently, size exclusion mechanism was found to be responsible for rejection of dyes as EBT was rejected up to > 92 % and Congo red (CR; M.W. = 696.6 g mol−1) rejection reached > 96% while it stayed at ≈ 88 % for Methylene blue (MB; M.W. = 319.8 g mol−1). The UV-Visible analysis of feed and permeate was conducted which confirmed the rejection of CR and MB. Hence, the PA(TEPA-TCL)@PSU/PETP membrane was found to be efficient for the purification of organic solvents contaminated with organic dyes. [Display omitted] [ABSTRACT FROM AUTHOR]