Ultrasound Imaging With a Flexible Probe Based on Element Array Geometry Estimation Using Deep Neural Network.

Conventionally, ultrasound (US) diagnosis is performed using hand-held rigid probes. Such devices are difficult to be used for long-term monitoring because they need to be continuously pressed against the body to remove the air between the probe and body. Flexible probes, which can deform and effectively adhere to the body, are a promising technology for long-term monitoring applications. However, owing to the flexible element array geometry, the reconstructed image becomes blurred and distorted. In this study, we propose a flexible probe U.S. imaging method based on element array geometry estimation from radio frequency (RF) data using a deep neural network (DNN). The input and output of the DNN are the RF data and parameters that determine the element array geometry, respectively. The DNN was first trained from scratch with simulation data and then fine-tuned with in vivo data. The DNN performance was evaluated according to the element position mean absolute error (MAE) and the reconstructed image quality. The reconstructed image quality was evaluated with peak-signal-to-noise ratio (PSNR) and mean structural similarity (MSSIM). In the test conducted with simulation data, the average element position MAE was 0.86 mm, and the average reconstructed image PSNR and MSSIM were 20.6 and 0.791, respectively. In the test conducted with in vivo data, the average element position MAE was 1.11 mm, and the average reconstructed image PSNR and MSSIM were 19.4 and 0.798, respectively. The average estimation time was 0.045 s. These results demonstrate the feasibility of the proposed method for long-term real-time monitoring using flexible probes. [ABSTRACT FROM AUTHOR]