Vibration Reduction Design and Test of UAV Load Radar.

It is challenging to design complex structures and calculate their dimensions only on the basis of theory. This issue was resolved efficiently by the FEM. Using the applicable test, the mechanical properties of the materials used in the damper are estimated, effectively guiding the design of the device and boosting its vibration-reducing performance. A large-load unmanned aerial vehicle (UAV) airborne radar is the subject of this research article. According to particular use case, vibration dampers for the radar-mounting platform are designed using passive vibration isolation technology to reduce aircraft vibration transmission to the radar. A conference paper has already presented prior research on the same topic. Earlier research confirmed the vibration-isolating efficacy of the T-type rubber isolator, which can greatly improve the operational conditions of the airborne radar. In contrast, earlier studies relied more on experimental validation and did not use numerical simulations. This research's primary objective is the development of a T-type rubber isolator, whose vibration reduction performance is proven using FEM and experiments. Utilizing a suitable simulation analysis method to investigate the vibration reduction of an unmanned aerial vehicle's (UAV) airborne component is a crucial technical task. By comparing multiple material models, a more precise model for characterizing rubber was developed. [ABSTRACT FROM AUTHOR]