Insights in improvement in wear behavior of titanium aluminide super alloy: effect of iron addition synthesized by spark plasma sintering.

Wear behavior of titanium alloys of Ti-4.5wt%Al + xFe (x: 2,4,6,8) produced by spark plasma sintering was investigated in order to highlight the effects of the iron additive on wear rate and coefficient of friction (COF). These research objectives were accomplished by a dry sliding experimental technique using the Tribometer (version 8.1.8) Anton Paar machine, which was carried out under normal loads at 10 N and 20 N with a linear speed of 0.06 cm/s. Scanning electron microscope (SEM) and X-ray diffraction (XRD) techniques were used to characterize the titanium alloy specimens. The results indicated that the wear rate increases with an increase in the applied normal load. A minimal coefficient of friction of 0.047 and a wear rate of 1.033 × 10−5 (mm3/N/M) were observed for Ti-4.5 wt% Al + 4 wt% Fe with respect to sliding at 10 N. While at a normal load of 20 N, a minimal friction coefficient of 0.015 and a wear rate of 1.74 × 10−5 (mm3/N/M) were obtained for Ti-4.5 wt% Al + 4 wt% Fe. [ABSTRACT FROM AUTHOR]