Numerical modeling and parametric analysis of thermal performance for the large-scale seasonal thermal energy storage.

[Display omitted] • A numerical model is proposed for seasonal thermal energy storage (STES) couple with solar collector. • The model is featured as relatively high computational speed and accuracy. • An analysis on technical planning and operational design for the STES is offered. • The key parameters for system design and control are investigated with instructive results. Seasonal thermal energy storage (STES) systems are a key component in expanding the share of renewables in energy programs because they provide schedulability and flexibility. However, such a large-scale system requires careful planning to avoid high investment costs. Therefore, numerical models are becoming increasingly important as an alternative. This paper develops a numerical model of STES coupled with solar collector. The model was verified based on the experimental data of the Huangdicheng Project in China. The results show that the relative error in the charging mode and discharging mode is only 1.57 % and 0.46 %, respectively. Then, the effects of different charging and discharging mode on the heat storage efficiency of the tank and the efficiency of solar collector systems in STES were studied. The study found that in the initial charging stage, the water temperature rise curve caused by different flow rates is very different. In the design of the collector-storage area ratio, the relatively economical collector-storage ratio of this model is around 3768 L/m2. The selection of different proportions of discharging energy in the discharge stage has a great impact on the heat storage efficiency of the system in the next year. Moreover, the influence of different depth-diameter ratios of the tank on the system heat storage efficiency is discussed in detail, which has important guiding significance for model application and system analysis. This paper provides some references for the scale design and operation optimization of cylindrical STES. [ABSTRACT FROM AUTHOR]