Elimination of room-temperature brittleness of Fe–Ni–Co–Al–Nb–V alloys by modulating the distribution of Nb through the addition of V.

Compared with Ti–Ni-based and Cu–Al-based alloys, Fe–Ni–Co–Al-based superelastic alloys have received great attention in recent years because of their low cost and excellent performance. However, the precipitation of brittle precipitates on grain boundaries in Fe–Ni–Co–Al-based polycrystalline alloys significantly reduces the mechanical properties. In this paper, the effects of V on the formation of brittle precipitates on both grain boundaries and inside grains and mechanical properties in Fe–Ni–Co–Al–Nb alloy were investigated systematically. The results show that γ′(Ni 3 Al) precipitate with L1 2 structure precipitate out on grain boundaries and inside grains in the Fe–Ni–Co–Al–Nb alloy during aging without V addition. The γ′ precipitate with L1 2 structure on the grain boundaries grew to form a heavily-coarsened L1 2 precipitate (HCLP γ′ precipitate) due to the accumulation of Nb on the grain boundaries, resulting in a significant decrease in elongation. With the addition of V, intragranular Nb and V can combine together with γ′ to form Ni 3 (Al, Nb, V) (nano-sized γ′ precipitate) composite precipitates, which improves the strength. More important, since the diffusion coefficient of V was larger than that of Nb, V preferentially occupied the lattice positions on grain boundaries, repelling Nb from the grain boundaries to the matrix. Thus, the coarsening of HCLP γ′ precipitate on the grain boundaries was reduced, and the elongation of Fe–Ni–Co–Al–Nb–V alloy was significantly improved. [ABSTRACT FROM AUTHOR]