New Tribological Aspects in the Micro-Areas of the Symmetric Rolling-Sliding Contact.

The study of wear that occurs during operation in the wheel–rail assembly is a difficult process to analyze. The phenomena that accompany the wear process are extremely complex and involve many factors, which vary greatly over different periods of time and at different times of wheel–rail contact. Estimating the behavior of the system and its wear in operation is difficult to obtain. However, for common engineering applications, for which the determining factors, such as road profile, load, skid, speed and weather conditions, are known, useful results can be obtained by laboratory tests or by numerical simulation. The article aims to model the complex phenomena that take place in the rail wheel system, taking into account the impact that most essential operational factors have. For this, the Finite Element Method (FEM) is used, thus, trying to explain the wear mechanisms of the wheel–rail system. The obtained results are verified in the laboratory. The main observation in the paper refers to the fact that in the areas of maximum stress and deformation, cracks appear at the micro scale. FEM proved to be a method that can predict the appearance of these microcracks, the experimental results validating the numerical experiments. The research offers results that can prove to be of great importance in practice, for the analysis and improvement of railway safety. [ABSTRACT FROM AUTHOR]