Flotation purification of waste high-silica phosphogypsum.

High-silica phosphogypsum (PG) is a kind of industrial by-product with great utilization potential. However, it is difficult to reuse PG directly due to the related gangue minerals (e.g., SiO 2), and thus efficient purification is required to allow its further applications. Herein, a typical high-silica phosphogypsum waste was purified by a new "reverse-direct flotation" method. The organic matters and fine slimes were removed by reverse flotation, and then, the silica impurity was removed by direct flotation. Via the closed-circuit flotation process, the whiteness of the PG concentrate is improved from 33.23 to 63.42, and the purity of gypsum in the PG concentrate increases from 83.90% to 96.70%, with a gypsum recovery of 85%. Additionally, the content of SiO 2 is significantly reduced from 11.11% to 0.07%. In-depth investigations suggest that the difference in the floatability of gypsum and quartz is prominently intensified by flotation reagents at pH = 2–2.5, and thus leads to good desilication performance. Further characteristics of the PG concentrate prove that impurities have been well removed, and the PG concentrate meets the requirement of related standards for gypsum building materials. The flotation method reported here paves the way for the purification of high-silica phosphogypsum, which can be extended to the purification and value-added reutilization of other industrial solid wastes. [Display omitted] • The "reverse-direct flotation" method effectively purifies the waste PG. • The surface of gypsum crystals after flotation purification is clean and smooth. • Flotation purification of waste PG can obtain huge environmental and economic benefits. [ABSTRACT FROM AUTHOR]