Theoretical and Experimental Study on the Effect of Selected Parameters in a New Method of Extrusion with a Movable Sleeve.

This paper presents a new method for forming hollow flanged products. The method involves extrusion with the use of a sleeve moving in the opposite direction to that of the punch. A tube with a constant hole diameter and two different outside diameters, made of aluminum alloy EN AW 6060 was used as a material. Numerical calculations were performed using Deform 2D/3D. Experiments were conducted on the PYE 160SS hydraulic press equipped with a specially designed device in which the punch is driven by the press slide while the moveable sleeve is driven by two hydraulic servomotors. Both numerical simulations and experiments were conducted under cold forming conditions. The aim of this study was to determine the effect of selected parameters (flange diameter, height of the cavity in the moveable sleeve, and the chamfer angle between the regions with different outside diameters on the workpiece and in the moveable sleeve cavity) on the stability of the extrusion process. Results were then used to undertake detailed comparative analyses of underfill, flange heights, and flange flank inclination angles. Findings of the analyses served as a basis for drawing conclusions regarding the effect of the analyzed parameters on the investigated extrusion process. [ABSTRACT FROM AUTHOR]