Application of LISA Gravitational Reference Sensor Hardware to Future Intersatellite Geodesy Missions.

Like gravitational wave detection, inter-spacecraft geodesy is a measurement of gravitational tidal accelerations deforming a constellation of two or more orbiting reference test masses (TM). The LISA TM system requires TM in free fall with residual stray accelerations approaching the fm/s 2 /Hz 1 / 2 level in the mHz band, as demonstrated in the LISA Pathfinder "Einstein's geodesic explorer" mission. Current geodesy missions are limited by accelerometers with 100 pm/s 2 /Hz 1 / 2 level, due to intrinsic design limitations, as well as the challenging low Earth orbit environment and operating conditions. A reduction in the TM acceleration noise could lead to an important improvement in the scientific return of future geodesy missions focusing on mass change, especially in a scenario with multiple pairs of geodesy satellites. We present here a preliminary assessment of how the LISA TM system, known as the "gravitational reference sensor" (GRS), could be adapted for use in future geodesy missions aiming at residual TM accelerations noise at the pm/s 2 /Hz 1 / 2 level, addressing the major design issues and performance limitations. We find that such a performance is possible in a geodesy GRS that is simpler and smaller than that used for LISA, with a lighter, sub-kg TM and gaps reduced from 4 mm to less than 1 mm. Acceleration noise performance limitations will likely be closely tied to the required levels of applied actuation forces on the TM. [ABSTRACT FROM AUTHOR]