Low-Ripple Continuous Control Set Model Predictive Torque Control for Switched Reluctance Machines Based on Equivalent Linear SRM Model.

In this article, a low-ripple continuous control set (CCS) model predictive torque control (MPTC) method for switched reluctance machines (SRMs) is proposed. The inherent high nonlinearity of the SRMs makes it difficult to solve the optimization problem in the CCS MPTC algorithm analytically. To address this issue, an equivalent linear SRM model is adopted, and the cost function is also properly modified. Then, with the torque boundary values provided by executing the voltage vectors of an improved switching table, the optimization problem in the CCS MPTC method becomes simple and analytically solvable. The Lagrange multiplier method is employed to solve this optimization problem analytically and generate the optimum torque reference values for the active phases. Based on the estimated torque variation rates, the duty cycles for each phase are calculated. Extensive simulation and experimental tests are carried out in a four-phase 8/6 SRM setup. These testing results reveal that the proposed CCS MPTC method shows much lower torque ripples and current ripples in a wide speed range with a low computational burden than the existing finite control set MPTC methods. [ABSTRACT FROM AUTHOR]