COMPARATIVE ROLLING CONTACT BEHAVIOR OF TWO APS COATINGS WITH DIFFERENT MATRIX.

In this study we analyzed the rolling contact fatigue behavior of two types of coatings made by thermal coating, by the method of atmospheric plasma spraying (APS) from two commercially available powders: Ni5Al5Mo and Al2O3 - 13 TiO2. The contact fatigue behavior was studied on an installation specially designed. The specimens were tested for 54 hours (at 1380 rpm), at a load of 944 N. For both types of coatings, the appearance of a wear path was observed, much more obvious in the case of the Ni matrix layer, also confirmed by profilometry. The mechanism of the wear phenomenon was predominantly of plastic deformation type (the material was pushed towards the edges of the wear path) in the case of NiAlMo coating. In the case of ceramic coating, the wear path width was very small (300-450 µm), with very few changes at the surface level of the coating, which recommends this type of material for applications that require wear resistance to rolling. [ABSTRACT FROM AUTHOR]