AC Losses in Form-Wound Coils of Surface Mounted Permanent Magnet Vernier Machines.

Surface mounted permanent magnet Vernier (SPM-V) machines, because of their high torque density and multi-pole structure, are promising candidates for low-speed direct-drive applications. To achieve high torque density, the SPM-V machines are generally designed with high gear ratios. Therefore, their operating frequencies can be much higher than those of the conventional SPM machines. This potentially increases the alternating current (AC) winding losses, especially those with form-wound coils proposed for high-power applications. This article investigates the AC losses (including skin effect, proximity effect, rotor PM induced, and circulating current losses) in form-wound stator coils of a 3 MW direct-drive SPM-V machine with different slot/pole number combinations. The study reveals that the SPM-V machines have significantly higher AC winding losses than their conventional SPM counterparts for similar operating conditions. To reduce the AC winding losses in SPM-V machines, a novel flux shunt concept is proposed along with other conventional techniques such as increasing the number of turns/coil (with terminal voltage being kept constant) and parallel strands/turn, providing extra clearance at slot opening. With the loss reduction techniques implemented, the SPM-V machines can achieve comparable efficiency but much higher torque density than their conventional counterparts. Moreover, the proposed flux shunt was also found to be very effective in reducing the potential risk of permanent magnet (PM) irreversible demagnetization, a key issue for SPM-V machines at high power ratings. [ABSTRACT FROM AUTHOR]