Armature Ejecta and Its Effects on Insulator Degradation in Solid-Armature Launchers.

Armature ejecta, which erodes the insulator and reduces surface dielectric strength, has been considered as a threat to solid-armature launchers. Two series of experiments were carried out in a small caliber launcher (SCL) to investigate the sources of armature ejecta and degradation mechanisms of the insulator. In first series of experiment, the ejection of armature was imaged by a high-speed camera. The influence of linear current density on ejection was studied in second series of experiment. Mass difference of insulator samples was used to evaluate the output of armature ejecta. Insulation performance was judged from the surface flashover voltage. And the degradation mechanism resulted from armature ejecta was analyzed based on the process of surface flashover. Results show that the local breakdown at armature–rail interfaces is one of the sources of armature ejecta. The amount of ejecta on samples increased with linear current density. Average flashover voltages decreased when ejecta increased in Zone A (0–200 mm) and Zone B (200–600 mm). And there was little difference of average flashover voltages in Zone C (600–900 mm). The discharge channel of the post-shot sample was composed of arcs and ejecta. The distortion of the surface electric field and the shorten of creepage distance are degradation mechanisms of bore insulators in solid-armature launchers. [ABSTRACT FROM AUTHOR]