Stability analysis and experimental research on ultrasonic cutting of wave-absorbing honeycomb material with disc cutter.

To address the problem of the poor stability of ultrasonic machining of wave-absorbing honeycomb material, this study takes ultrasonic cutting of wave-absorbing honeycomb material with a disc cutter as the research object and establishes a multi-degree-of-freedom mathematical model of the cutting system based on the relative positions of the tool, the wave-absorbing honeycomb material, and the motion characteristics of the tool. On this basis, modal analysis of the disc cutter and the honeycomb cell wall plate is carried out to draw the Lobe diagram of ultrasonic cutting stability, the process experimental parameters are determined to accord to the solved stability Lobe diagram, and machining stability verification experiments are carried out. The experimental results show that the machining parameters in the stable zone of the Lobe diagram result in a neat and clean surface, less fibre pullout, a complete outer substrate, and less tool wear than those in the critical and unstable zones, thus verifying the correctness of the theoretical model and the stability Lobe diagram. [ABSTRACT FROM AUTHOR]