Mode I crack growth in paper exhibits three stages of strain evolution in reaching steady-state.

The mechanical properties of wood fiber-based, commercial papers and metal foils are qualitatively similar, and their plane stress, Mode I crack growth resistances have not been reliably correlated with single-valued fracture mechanics parameters for centimeter-scale specimens. Experimentally-measured crack tip strain fields of Mode I cracks growing in commercial paper were used to define a three-stage, steady-state crack growth mechanism. Immediately upon loading, the net sections ahead of the cracks yielded. As the cracks began to grow, well-defined zones of (incremental) active plasticity (ZAPs) formed within the yielded ligaments. Cracks transitioned to steady-state growth with an average characteristic stress, σ c , of 20.9 MPa. In contrast to metallic foils, the characteristic stress in steady-state cracks in paper was offset by 8.3 MPa due to a 1.9 mm fiber bridging zone that scaled with the average fiber agglomerate (floc) size. The fiber network structure also induced a large, reversed steady-state zone in the crack wakes. While reversed ZAPS were previously predicted by numerical models of plane strain Mode I and III cracks under small-scale yielding conditions, they were never observed experimentally and were neglected. The types and evolution of the cumulative and incremental plastic zones in paper defined appropriate paths for steady-state J -integral calculations. [ABSTRACT FROM AUTHOR]