Back to Search
Start Over
An experimental technique for evaluating viscoelastic damping using ultrasonic guided waves.
- Source :
-
Ultrasonics . Jul2022, Vol. 123, pN.PAG-N.PAG. 1p. - Publication Year :
- 2022
-
Abstract
- • Investigating an innovative approach to determine the damping property of a viscoelastic coating using ultrasonic Lamb wave in a metal-polymer waveguide. • Dropping amplitude signals as well as changing the phase of Lamb wave when travels through the coated waveguide. • Exploiting the obtained damping property in FEM software, ABAQUS. • Reducing computational cost and time by taking advantage of the experiment-based fitting method. • Verification of amplitude ratio as well as group velocity dispersion curves related to the FEM simulation by experimental results with an error of less than 1%. • Confirming the excitability of piezo discs in a range of frequency with tangible precision. This work presents an innovative approach according to an experiment-based fitting method to determine the damping property of a viscoelastic coating layer, in a simple, low-cost, and time-effective manner. In this experiment, symmetric and asymmetric ultrasonic Lamb waves were applied to two coated plates with different thicknesses, and the waves were generated using piezo discs. A viscoelastic coating influences the signal amplitude as well as the wave phase. By comparing the amplitude ratio (AR) of the transmitting signals between the coated and bare plates, the damping property of the viscoelastic coating was experimentally determined. Similar to the experiments employing the finite element method (FEM) software, in this experiment, ABAQUS, was employed to verify the conformity between numerical and experimental AR. By selecting a non-dispersive Rayleigh damping β for the coating layers at all frequencies, the computational cost reduced significantly to one-tenth the original cost. Apart from corroboration by AR matching, the numerical dispersion curves of the group velocity were also validated by experimental curves. The FEM dispersion curves in the frequency range of the tests were found to be highly reliable, with an average error of less than 1% for the first experimental setup and 10% for the second setup. Furthermore, in coated waveguides, the proposed technique could precisely estimate the damping property of the viscoelastic coating layers, where excitability in a wide range of frequencies is required. However, this precision strongly relies on the selected mode, frequency range, PZT quality, and waveguide thickness. [ABSTRACT FROM AUTHOR]
Details
- Language :
- English
- ISSN :
- 0041624X
- Volume :
- 123
- Database :
- Academic Search Index
- Journal :
- Ultrasonics
- Publication Type :
- Academic Journal
- Accession number :
- 155653059
- Full Text :
- https://doi.org/10.1016/j.ultras.2022.106707