Influence of ambient oxygen pressure on the preferred orientation, microstructures, and dielectric properties of (Ba1-xSrx)TiO3 thin films with compositionally graded structures.

Compositionally graded (Ba1-xSrx)TiO3 (BST) thin films, with x decreasing from 0.25 to 0.0, were deposited on Pt(111)/Ti/SiO2/Si(100) substrates by pulsed-laser ablation at 600 °C and under ambient oxygen pressures ranging from 50 to 400 mTorr. The influence of the ambient gas pressure on the preferred orientation, microstructures, and dielectric properties of compositionally graded BST films was investigated by X-ray diffraction, scanning electron microscopy, and dielectric frequency spectra, respectively. As the ambient oxygen pressure was increased, the preferred orientation evolved in the order: (100)+(110)?(110)+(111)? random orientation, and the surface roughness of the graded BST films also increased. The graded BST films deposited at high ambient oxygen pressures (300~400 mTorr) exhibited a grainy structure with polycrystalline grains throughout the film thickness, whereas the graded films deposited at low ambient oxygen pressures (50~200 mTorr) possessed a columnar structure. The evolution of the microstructure was ascribed to the different physical and chemical properties of the species that were incident onto the substrates at the various oxygen pressures. The dielectric properties of the graded BST films were dependent upon the ambient oxygen pressures. The graded BST films deposited at 200 mTorr exhibited the highest dielectric constant. [ABSTRACT FROM AUTHOR]