Estimation of reactivity feedback and determination of safety criteria of inherent-safety fast reactors in unprotected transients based on the asymptotic approximation.

• Estimation of reactivity feedback has been studied for an inherent safety fast reactor in unprotected transients. • The asymptotic approximation has been applied to estimate fuel and coolant temperatures. • Determination of safety criteria has been carried out to avoid fuel melting and coolant boiling. The effect of feedback reactivity on the safety of a fast reactor has been studied based on the asymptotic approximation for unprotected transients. The asymptotic approximation adopts the steady state heat transfer equation for calculating temperatures of coolant and fuel with the use of the relevant core power and mass flow. The feedback reactivity can be approximately estimated from the temperatures. This approximation is applied to the UTOP (unprotected transient overpower) and ULOF (unprotected loss of flow) accidents of a sodium-cooled fast reactor with a sodium plenum and GEM (gas expansion module). The reactivity feedback has been estimated, and the constraints of the feedback reactivity for maintaining the safety of the core have been predicted. For the UTOP accident the constraint for the control rod reactivity and the Doppler (+fuel expansion) reactivity coefficient is presented to prevent the fuel melting. For the ULOF accident the constraint of the parameter R is introduced which is the normalized ratio of the power to mass flow rate. The parameter does not exceed the critical point corresponding to the onset of the coolant boiling, and the coolant boiling does not occur because of the large negative reactivity insertion by the GEM. Thus the core safety can be approximately estimated by the present method without detailed calculations, though the accurate analyses are required by the use of transient analyses. [ABSTRACT FROM AUTHOR]