Performance investigation of the wood-based heat localization regenerator in liquid desiccant cooling system.

An energy conservative air-conditioning system is critical to promoting energy conservation and emission reduction. One promising alternative is liquid desiccant cooling system (LDCS), which can be driven by low-grade heat and has superior dehumidification performance. However, energy waste from traditional regeneration process restricts its application from widespread use. To overcome this disadvantage, a wood-based heat localization regenerator is presented: it localizes the thermal energy on the regeneration surface avoiding the unnecessary heating of bulk solution. The real performance of this new regenerator has been investigated theoretically and experimentally in this paper. The regeneration process of desiccant solution has been analyzed and a regeneration performance prediction model has been developed. Some performance indexes have been derived from experimental data. A regeneration performance comparison has been conducted between the heat localization method and the traditional heating method. The results show that the new method improves regeneration thermal efficiency by above 50% and the maximum value can achieve 43.6%. Besides higher performance, the reduction of energy consumption, initial cost and complexity has achieved with the heat localization regenerator. The overall improvement makes LDCS such a competitive alternative to the current air-conditioning system. [Display omitted] • A wood-based heat localization regenerator is presented for efficient regeneration. • The actual performance of heat localization regeneration method has been revealed. • The heat localization method improves regeneration thermal efficiency by more than 50%. • The heat localization based LDCS has advantages on performance, initial cost and complexity. [ABSTRACT FROM AUTHOR]